UKTC will open officially open the doors to its new fire resistance laboratory on the 9th of July 2026 follow UKAS accreditation for its new furnace. LABORATORY OPENING DAY A MILESTONE FOR FIRE SAFETY IN THE UK On the 9th of July 2026, UKTC will officially open the doors of its new fire resistance test laboratory and will mark the occasion with a live demonstration of the new furnace. Alongside the live fire resistance test, the event will be a celebration featuring live presentations, street food and opportunities for networking with professionals from across the fire safety industry. The event will be by invitation only and due to the limited numbers we are welcoming those interested in attending to register their interest using the form at the bottom of this page. SCHEDULE OF EVENTS 11:00 Arrival & Networking 12:00 Opening Remarks 12:30 Keynote Speaker 13:30 Street Food Lunch & Networking 14:30 Live Fire Resistance Test Demonstration 15:15 Expert Panel Q&A 16:00 Closing Remarks 18:00 Event Networking Reception A detailed schedule of events will be issued in due course.

We've created a list of the most common questions related to fire testing & certification to help you navigate it. If you can't find what you're looking for, as our team. Fire Testing & Certification Frequently Asked Questions It's easy to be overwhelmed with the amount of information related to the fire testing & certification of products. We've pulled together some of the most common question below to help you. If your question isn't answered below, contact one of our team and we will get back to you. Frequently asked questions General Fire Resistance Testing Reaction to Fire Testing Technical Services How long does it take to get results? On completion of the test, the responsible officer will confirm the results within 24 hrs. This will be followed by a comprehensive draft report within 14 days. Can my product be changed from what was tested? Unlike fire resistance tests under British Standards, European standards provide a Direct Field of Application (DIAP) which detail the permissible changes from what was tested. An Extended Field of Application (EXAP) can also be undertaken which offers a great scope of variations than a DIAP. What is third-party certification? Third-party certification is independent verification that a product or service fulfils certain criteria. With passive fire protection products, this normally involves a certification body assessing test results, carrying out a factory production control audit and undertaking periodic inspections to ensure constancy of performance. UKTC work with many approved certification providers, including Bluesky Certification, IFC Certification and UL Solutions. What is UKCA Marking? UK Conformity Assessed (UKCA) marking is the new product marking which will be required for certain products placed on the market in Great Britain (England, Wales and Scotland). Does my product require UKCA Marking? The Construction Products Regulation in Great Britain states that any Construction Product covered by a UK Designated Standard must be UKCA marked. ASK OUR TESTING & CERTIFICATION EXPERTS Contact our team of testing & certification experts for more information. We aim to get back to you within 4 hours Get in touch

Learn more about David Brown and the team behind delivering fire resistance and reaction to fire testing for passive fire protection product manufacturers. Our Team David Brown Business Unit Director Meet the team Learn more about the team dedicated to delivering leading fire testing and certification services. Our Team

Calculate the risk to your business as we approach the 2029 removal of BS 476 from Approved Document B. TRANSITIONING FROM BS 476 EVIDENCE Calculate Your Risk Together with industry experts, we've created a short form that lets you calculate the risk to your business in just a couple of minutes. LET'S START

Understanding a fire door classification following its fire and smoke leakage tests is crucial for specifying the correct door. We help you understand the classifications. FIRE DOOR CLASSIFICATIONS Understanding a fire door classification is crucial for specifying the door on construction projects and for existing buildings. How to read Fire Door Classifications The only way to specify and verify the performance of a fire door is to first understand a fire door classification. A classification can tell you the expected performance of a door at a glance and is crucial for all stakeholders involved. In the UK there are currently two routes to market for fire door manufacturers; the British (BS) or European (EN). The fire door classifications are different so it is crucial to understand both as a classification will allow you to identify both the performance and how the door was tested. Reading a Reaction to Fire Classification For example, a classification of "B-s1,d0" indicates that the material has very limited contribution to fire (B), minimal smoke production (s1), and no flaming droplets or particles (d0). Construction products should be clearly labelled to allow you to identify its reaction to fire. If you're ready to test your product, or test and existing product within your building, contact our team by clicking here . British Standard Fire Door Classifications Notation Meaning Smoke Tested? FD30 30-minute fire integrity performance to BS 476-22 No FD30S 30-minute fire integrity plus smoke leakage performance to BS 476-31.1 Yes - full perimeter including threshold FD60S 60-minute fire integrity plus smoke leakage performance to BS 476-31.1 Yes - full perimeter including threshold European Standard Fire Door Classifications Notation Meaning Smoke Tested? E30 Sa3 30-minute fire integrity, ambient smoke control on 3 sides (head and jambs). 3 sides - no threshold E30 Sa4 30-minute fire integrity, ambient smoke control on all 4 sides. 4 sides - including threshold EI₂30 Sa4 30-min integrity and insulation, ambient smoke control on all 4 sides. 4 sides - including threshold Button Testing Reaction to Fire Button Technical Classification Reports Button Certification UKTC ensure™ Button Testing Doorsets & Hardware Button Technical EXAP Reports Button Testing Walls & Partitions

Secure safety with UKTC's comprehensive fire-resistance testing options. Specialising in doorsets, hardware, glazing systems, walls, partitions, and joint seals. Expect excellence in service and results. Reach out to our team for your specific needs. FIRE RESISTANCE TESTING Independent, UKAS accredited fire resistance testing for construction products, building materials and structural component to British (BS) and European (EN) standards. What is fire resistance testing? Fire resistance testing measures the ability of a building element, structure, or material to withstand exposure to a fire without failing. These tests are critical for ensuring the passive fire protection of a building, the first line of defence that protects lives, assets and structural integrity in the event of a fire. The fire resistance of a product is typically expressed in minutes between 30 - 240 minutes and across three performance criteria: load-bearing capacity (R), integrity (E) and insulation (I). OUR FIRE RESISTANCE TESTING SERVICES Doorsets & Hardware We provide accredited, independent fire door testing as well as door hardware including locks and latches, hinges, door closing devices, panic exit devices and door furniture. Learn More Penetration Seals Penetration seals testing confirms the compliance of the seal with building codes and standards to ensure that that the seals maintain their protective properties during a fire. Learn More Walls & Partitions We provide fire resistance testing of walls and partitions to BS, EN, and International standards for load bearing and non-load bearing systems. Learn More Linear Joint Seals Linear joint seal testing assesses the effect of a linear joint seal on the integrity and insulation of the construction. Learn More Glazing Systems Our UKAS accredited testing laboratory is able to perform fire resistance testing for fire rated glazing, glazing seal systems, and composite glazing screens and windows. Learn More Ceilings & Floors Floor & suspended ceiling systems are often fire tested together to demonstrate performance as a system. UKTC is accredited to test floors and flat roofs in accordance with BS EN 1365-2:2014 & BS EN 1364-2:2018. Learn More Fire Resistance Testing Process Unsure about the timeline and process involved in a fire resistance test? Click the button below to find out what's involved in your next fire test. Find out more Button Testing Reaction to Fire Button Technical Classification Reports Button Certification UKTC ensure™ Button Testing Doorsets & Hardware Button Technical EXAP Reports Button Testing Walls & Partitions

Learn more about Abby Gray and the team behind delivering fire resistance and reaction to fire testing for passive fire protection product manufacturers. Our Team Abby Gray Technical Officer Abby joined UKTC in November 2023 following completion of an HNC in Computer Aided Design. Now in her role as a Technical Surveyor, Abby uses her expertise to conduct fire resistance test specimen surveys and create the associated technical drawings. Meet the team Learn more about the team dedicated to delivering leading fire testing and certification services. Our Team

Learn more about Matthew Dale and the team behind delivering fire resistance and reaction to fire testing for passive fire protection product manufacturers. Our Team Matthew Dale Reaction to Fire Manager Matthew brings a wealth of experience to UKTC following a long career in the testing and certification industry. Prior to joining UKTC in August 2024, Matthew spent some time at the British Board of Agrément as Principal Certification Officer following over two decades at Warringtonfire in similar roles. Meet the team Learn more about the team dedicated to delivering leading fire testing and certification services. Our Team

Dive into the BS EN 13823:2020 test process, where we assess building products' reaction to thermal attack by a single burning item. SINGLE BURNING ITEM (SBI) TESTING BS EN ISO 13823:2020 WHAT IS A SINGLE BURNING ITEM (SBI) TEST? This procedure specifies a method of test for determining the rection to fire performance of construction products when exposed to thermal attack by a single burning item (SBI). The test specimen consists of 2 vertical wings forming a right-angled corner. The dimensions of the wings are: The long wing: 1500mm high x 1000mm long. The short wing 1500mm high x 500 + (thickness of long wing) mm long The maximum thickness shall be no more than 200mm. If the product is thicker than 200mm, then thickness shall be reduced on the unexposed side. The samples must be conditioned, a minimum of 3 samples must be tested. The extraction is set to a volume flow of 0.6=-0.05m³/s. Each test specimen is then fixed in the trolley and is exposed to a flame from a burner placed at the bottom of the corner. The flame is obtained by combustion of propane gas and gives heat output of 30.7±2kW. The flame is applied for 20 mins. The test apparatus measures the following: Temperatures of exhaust gases Volume flow in the exhaust Light attenuation (for measurement of smoke density) O2 and CO2 mole fraction of the exhaust gases. These quantities are recorded automatically and are used to calculate the Heat Release Rate (HRR) and Smoke Production Rate (SPR). A visual observation is also measured for flaming droplets an horizontal spread of flame. HRR is used to calculate FIGRA (fire growth rate) at 0.2 and 0.4MJ, and SPR is used to calculate SMOGRA (smoke growth rate). The test report is then written by the highly experienced UKTC team. WHAT PRODUCT CLASSIFICATIONS REQUIRE BS EN 13823:2020 TESTING? The Single Burning Item (BS EN 13823:2020) test would be required in order to achieve a product classification of A2, B, C and D: A1 A2 B C D E F How to Read Product Classifications

Ensure the fire safety of your doorsets with UKTC's accredited testing services. Our UKAS lab tests timber, steel, aluminium, and composite doorsets, plus hardware. Get comprehensive, internationally recognised fire resistance reports. Your safety is our mission DOORSETS & HARDWARE TESTING We provide accredited independent fire door testing services and fire resistance testing for door hardware and ironmongery. Your Doorset Testing Process We are able to test timber, steel, aluminium and composite doorsets as well as door hardware such as: locks and latches, hinges, door closing devices, panic exit devices and door furniture. UKAS Accredited Laboratory Our UKAS accredited testing laboratory No. 21542 can provide full end-to-end fire testing services alongside fire resistance testing. Comprehensive Report Once your test is completed, you will be issued with a comprehensive and internationally recognised fire resistance test report accessible by your very own online portal with a full video of the test conducted. Test Standards BS 476-22: 1987 § 6, 7 & 8 BS EN 1634-1:2014+A1: 2018 Frequently asked questions How long does it take to get results? On completion of the test, the responsible officer will confirm the results within 24 hrs. This will be followed by a comprehensive draft report within 14 days. Can my product be changed from what was tested? Unlike fire resistance tests under British Standards, European standards provide a Direct Field of Application (DIAP) which detail the permissible changes from what was tested. An Extended Field of Application (EXAP) can also be undertaken which offers a great scope of variations than a DIAP. What is third-party certification? Third-party certification is independent verification that a product or service fulfils certain criteria. With passive fire protection products, this normally involves a certification body assessing test results, carrying out a factory production control audit and undertaking periodic inspections to ensure constancy of performance. UKTC work with many approved certification providers, including Bluesky Certification, IFC Certification and UL Solutions. What is UKCA Marking? UK Conformity Assessed (UKCA) marking is the new product marking which will be required for certain products placed on the market in Great Britain (England, Wales and Scotland). Does my product require UKCA Marking? The Construction Products Regulation in Great Britain states that any Construction Product covered by a UK Designated Standard must be UKCA marked. What is BS EN 1634-1? BS EN 1634-1:2014 + A1:2018 is a European standard that specifies the test methods for assessing the fire resistance of door and shutter assemblies, including openable windows and elements of building hardware. This standard is crucial for evaluating how well these components can withstand fire, aiming to restrict fire development, limit its spread, and protect escape routes. What is BS 476 Part 22? BS 476 Part 22 is a key standard within the UK's building safety regulations that specifies methods for testing the fire resistance of non-loadbearing elements of construction, such as doors, shutters, and various types of ducts and dampers. This standard is instrumental in determining how these elements will perform in the event of a fire, ensuring they meet the necessary safety requirements to protect building occupants and property. How much does a fire resistance test cost? Full-scale Fire Resistance tests are priced from £9,000 plus VAT. However, every test is unique, and fees can vary based on the scope of work involved. During contract review, UKTC personnel will work collaboratively with customers to ensure that the broadest field of application is achieved whilst minimising investment. What is BS EN 13501-1? BS EN 13501-1 is a European standard that classifies the fire performance of a constriction product. The standard provides a framework, and series of tests used to determine how materials react to fire including its smoke production and flaming droplets. It assigns Euroclass ratings (A1, A2, B, C, D, E, F) to products based on their performance. What is Reaction to Fire Testing? Reaction to Fire testing examines the characteristics, such as combustibility, smoke production and flaming droplets, of building materials to determine the product's contribution to fire development and spread. How much does a reaction to fire test cost? The tests involved in a Reaction to Fire test program are dependent on the classification the product requires. This will then impact the test. A typical, full scale Reaction to Fire test program of one product can be between £2,000 and £5,000. What is an Extended Field of Application Report (EXAP)? Extended Field of Application (EXAP) reports present a prediction of performance based on one or more test results, thereby enabling a broader field of application while maintaining or enhancing performance to product in question. How long does it take to complete a scoping analysis? Every Scope Analysis is unique to the manufacturer. On average, a scoping analysis including the production of a full report will take no longer than two weeks. Button Testing Reaction to Fire Button Technical Classification Reports Button Certification UKTC ensure™ Button Testing Doorsets & Hardware Button Technical EXAP Reports Button Testing Walls & Partitions

Learn more about Andrew Hutchison and the team behind delivering fire resistance and reaction to fire testing for passive fire protection product manufacturers. Our Team Andrew Hutchison Operations Director In late 2020, not long after the company's inception, Andrew started in the role of Technical Manager where he led the implementation of UKTC's fire resistance testing operations. Now in the role of Head of Technical Services, Andrew works closely with key stakeholders across all departments to ensure that the business meets key strategic objectives. Meet the team Learn more about the team dedicated to delivering leading fire testing and certification services. Our Team

UKTC's privacy policy for collecting data on website users and email recipients. Privacy Policy What information do we collect about you? We collect information about you when you register with us or place an order for services or products. We also collect information when you voluntarily complete customer surveys, provide feedback and participate in competitions. Website usage information is collected using cookies. How will we use the information about you? We collect information about you to process your order, manage your account and, if you agree, to email you about other products and services we think may be of interest to you. We use your information collected from the website to personalise your repeat visits to our website. If you agree, we shall pass on your personal information to our group of companies so that they may offer you their products and services. United Kingdom Testing and Certification will not share your information for marketing purposes with any external companies. In processing your order, we may send your details to, and also use information from credit reference agencies and fraud prevention agencies. Emails Emails sent by United Kingdom Testing & Certification employees are intended only for the named individuals. If you are not the named addressee you should not replicate or distribute the email. Please notify the sender immediately by email. Email transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete. Marketing We would like to send you information about products and services of ours and other companies in our group which may be of interest to you. If you have consented to receive marketing, you may opt out at a later date. You have a right at any time to stop us from contacting you for marketing purposes. If you no longer wish to be contacted for marketing purposes, please contact us. Access to your information and correction You have the right to request a copy of the information that we hold about you. If you would like a copy of some or all of your personal information, please contact us. We may make a small charge for this service. We want to make sure that your personal information is accurate and up to date. You may ask us to correct or remove information you think is inaccurate. Cookies Cookies are text files placed on your computer to collect standard internet log information and visitor behaviour information. This information is used to track visitor use of the website and to compile statistical reports on website activity. For further information visit www.aboutcookies.org or www.allaboutcookies.org . You can set your browser not to accept cookies and the above websites tell you how to remove cookies from your browser. However, in a few cases, some of our website features may not function as a result. Other websites Our website contains links to other websites. This privacy policy only applies to this website so when you link to other websites you should read their own privacy policies. Changes to our privacy policy We keep our privacy policy under regular review, and we will place any updates on this web page. This privacy policy was last updated on 10th February 2021. How to contact us Please contact us if you have any questions about our privacy policy or information we hold about you.