top of page
UKTC offer Acoustic Testing, also known as Sound Insulation Testing to BS EN ISO 10140 for construction and building products from its UK based laboratory.
TESTING /

Acoustic Testing

Coming Soon to UKTC's laboratory and test facility, a purpose-built acoustic test suite in accordance with BS EN ISO 10140-5:2021.

GET A QUOTE

Acoustic Testing

The acoustic test suite is designed to measure airborne sound insulation performance of doorsets, walls, glazing, partitions and other building elements. All tests are performed under the BS EN ISO 10140 series and rated to BS EN ISO 717-1. 


How laboratory acoustic testing works


Laboratory acoustic testing measures how much sound passes through a building element. The specimen sits between a source and receiver room where sound levels are measured across a range of frequencies. ​The result gives manufacturers, specifiers and technical teams the evidence they need to position products in the market for key projects.

​

The test specimen is installed between two adjoining test rooms, with sound generated in the source room and measured in the receiving room. This allows us to assess sound passing horizontally through vertical building elements such as walls and doorsets.

​

During testing, a controlled sound field is generated across a range of frequencies. Sound levels are measured on both sides of the specimen and the acoustic characteristics of the receiving room are taken into account. From this, the sound reduction performance of the complete construction can be determined across the frequency range.


The BS EN ISO 10140 Series


Testing is undertaken in accordance with the BS EN ISO 10140 series, with airborne sound insulation performance rated in accordance with BS EN ISO 717-1.

​

For manufacturers, this testing can help to:

​

  • demonstrate the acoustic performance of a wall or complete doorset;

  • compare different product constructions or configurations;

  • identify areas where further product development may be beneficial; and

  • generate performance data to support technical literature, specification and product development.

We provide accredited independent fire door testing services and fire resistance testing for door hardware and ironmongery.

Doorsets and Hardware Testing

Start Now
We provide accredited independent wall and partition testing services to ensure compliance with the highest standards required.

Wall & Partition System Testing

Start Now
We provide accredited independent glazing systems testing services to ensure compliance with the highest standards required.

Glazing Systems Testing

Start Now
The purpose of fire resistance testing is to confirm compliance with building codes and standards, ensuring the seals maintain their protective properties during a fire.

Penetration Seals Testing

Start Now
The purpose of fire resistance tests on linear joint seals is to assess the effect of a linear joint seal on the integrity and insulation of the construction.

Linear Joint Seals Testing

Start Now
Horizontal floor & ceiling fire testing services from a UK-based laboratory.

Floors and Ceilings Testing

Start Now
​UKTC's smoke leakage chamber enables comprehensive and UKAS accredited smoke leakage testing performed to either BS EN 1634-3:2004 or BS 476-31.1:1983.​​

Smoke Leakage Testing

Start Now
This procedure specifies a method of test for determining the rection to fire performance of construction products when exposed to thermal attack by a single burning item (SBI).

Single Burning Item (SBI) Test

Start Now
This test identifies products that will not, or not significantly, contribute to fire, regardless of their end use.

Non-combustibility Test

Start Now
This method specifies a test for determining the ignitability of products by direct small-flame impingement under zero impressed irradiance using vertically oriented test specimens.

Flame Source Test

Start Now
This test determines the potential maximum total heat release of a product when completely burned, regardless of its end use.

Gross Heat of Combustion Test

Start Now

other tests we provide

Trusted to ensure

Underline_2.png

Our team consists of the brightest scientists, engineers, researchers and technicians from the built environment industry. We share a common goal - to enable greater protection of lives and assets - and are ready to help you.

SPEAK TO US

FREQUENTLY ASKED QUESTIONS

bottom of page